This code is set when TCM detected that message is not received at communication line.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
No message from ECM |
•
Open or Short in CAN communication harness
•
TCM |
Enable Conditions |
•
Time after TCM turns on >0.5sec
•
Input speed > 400rpm | |
Threshold value |
•
Message from ECM No message | |
Detecting Time |
•
More than 2sec | |
Fail safe |
•
Engine speed:3000rpm
•
Throttle : 50%
•
Engine torque : Max*0.7 * Inhibit TIME OUT happen at BUS OFF happen. |
