If CKPS cannot find reference mark 2 or more times during starting , P0335 is set.
Item | Detecting Condition | Possible Cause | |
DTC Strategy |
•
Reference mark check (During cranking) | 1. Poor connection 2. Open or short in signal circuit 3. CKPS | |
Enable Conditions |
•
- | ||
Threshold Value | Case1 |
•
No signal input detected | |
Case2 |
•
Gap position missed | ||
Case3 |
•
Gap position not found | ||
Case4 |
•
Teeth no. between consecutive gaps is not correct | ||
Diagnostic Time |
•
Continuous | ||
MIL ON Condition |
•
2 driving cycle | ||
