2.
Remove the hood latch (A) mounting bolts.
Tightening torque :
7.8 ~ 11.8N.m (0.8 ~ 1.2kgf.m, 5.8 ~ 8.7 lb-ft)
Remove the front bumper cover.
(Refer to Front Bumper - "Front Bumper Cover")
Remove the hood latch (A) mounting bolts.
Tightening torque :
7.8 ~ 11.8N.m (0.8 ~ 1.2kgf.m, 5.8 ~ 8.7 lb-ft)
Disconnect the hood latch cable (A) and remove the hood latch (B).
Install in the reverse order of removal.
Make sure the hood latch release cable is connected properly.
Make sure the hood locks/unlocks and opens/closes properly.
Adjust the latch alignment.
