4.
Remove the heat protector (C) after removing 3 bolts. [LHD only]
Tightening torque :
14.7 ~ 19.6N.m (1.5 ~ 2.0kgf.m, 10.8 ~ 14.5lb-ft)
Turn ignition switch OFF and disconnect the negative (-) battery cable.
Remove the cowl top cover.
<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=bd&mmcid=4&group=SHOP&pdftype=&cat1=2013+%3E+D+1%2E4+TCI%2DU2&ec=&firstnodedesc=Body+%28Interior+and+Exterior%29&sitinfolist=91%5E9147%5E91470010%5Enone%5E801%5E6%5EENG%5EKM%5EJD12%5E2013%5Ebd%5E4%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">(Refer to Body - "Cowl Top Cover")</a>
Disconnect the exhaust gas temperature sensor #1 connector (A) and the #2 connector (B).
Remove the heat protector (C) after removing 3 bolts. [LHD only]
Tightening torque :
14.7 ~ 19.6N.m (1.5 ~ 2.0kgf.m, 10.8 ~ 14.5lb-ft)
Disconnect the differential pressure sensor connector (A).
Disconnect the hoses (B) connected with the differential pressure sensor from the DPF assembly.
Remove the front muffler (A).
Tightening torque :
39.2 ~ 58.9N.m (4.0 ~ 6.0kgf.m, 28.9 ~ 43.4lb-ft)
Remove the DPF assembly brackets (A, B, C).
Tightening torque :
39.2 ~ 49.1N.m (4.0 ~ 5.0kgf.m, 28.9 ~ 36.2lb-ft)
Remove the DPF assembly installation bolts/nut (A).
Tightening torque :
39.2 ~ 49.0N.m (4.0 ~ 5.0kgf.m, 28.9 ~ 36.2lb-ft)
Remove the right driveshaft for securing theworking space.
<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=ds&mmcid=1&group=SHOP&pdftype=&cat1=2013+%3E+D+1%2E4+TCI%2DU2&ec=&firstnodedesc=Driveshaft+and+axle&sitinfolist=31%5E3105%5E31050100%5Enone%5E801%5E6%5EENG%5EKM%5EJD12%5E2013%5Eds%5E1%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">(Refer to Driveshaft and Axle - "Front Driveshaft")[RHD Only]</a>
Remove the CPF assembly by lifting it up. [LHD]
Remove the CPF assembly by taking it down. [RHD]
