3.
Remove the IMS module (A) after loosening 3 screws in the bottom of seat.
Remove the negative (-) battery terminal.
Remove the driver seat in the car.
<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=bd&mmcid=4&group=SHOP&pdftype=&cat1=2013+%3E+G+1%2E6+MPI&ec=&firstnodedesc=Body+%28Interior+and+Exterior%29&sitinfolist=91%5E9187%5E91870010%5Enone%5E801%5E6%5EENG%5EKM%5EJD12%5E2013%5Ebd%5E4%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">(Refer to Body - "Front Seat Assembly") </a>
Remove the IMS module (A) after loosening 3 screws in the bottom of seat.
Disconnect the IMS module connector (A).
Install the IMS module after connecting the connector.
Install the front seat.
Make sure the IMS module connectors and related connectors are plugged in properly.
Check that IMS system operates normally.
