Disconnect the negative (-) battery terminal.

Remove the glove box housing.

<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=bd&mmcid=4&group=SHOP&pdftype=&cat1=2013+%3E+G+1%2E6+MPI&ec=&firstnodedesc=Body+%28Interior+and+Exterior%29&sitinfolist=91%5E9154%5E91540070%5Enone%5E801%5E6%5EENG%5EKM%5EJD12%5E2013%5Ebd%5E4%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">(Refer to Body - "Glove Box Housing")</a>

Remove the smart key unit (A) with loosening nuts and screw, then disconnect the connector.

Disconnect the negative (-) battery terminal.

Remove the crash pad center lower panel.

<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=bd&mmcid=4&group=SHOP&pdftype=&cat1=2013+%3E+G+1%2E6+MPI&ec=&firstnodedesc=Body+%28Interior+and+Exterior%29&sitinfolist=91%5E9154%5E91540150%5Enone%5E801%5E6%5EENG%5EKM%5EJD12%5E2013%5Ebd%5E4%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">(Refer to Body - "Main Crash Pad Assembly")</a>

Disconnect the connector, then remove the interior #1 antenna (A) after loosening 2 screws.

Disconnect the negative (-) battery terminal.

Remove the floor console assembly.

<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=bd&mmcid=4&group=SHOP&pdftype=&cat1=2013+%3E+G+1%2E6+MPI&ec=&firstnodedesc=Body+%28Interior+and+Exterior%29&sitinfolist=91%5E9151%5E91510010%5Enone%5E801%5E6%5EENG%5EKM%5EJD12%5E2013%5Ebd%5E4%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">(Refer to Body - "Floor Console Assembly")</a>

Disconnect the connector, then remove the interior #2 antenna (A) with loosening 2 screws.

Disconnect the negative (-) battery terminal.

Remove the rear transverse trim.

<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=bd&mmcid=4&group=SHOP&pdftype=&cat1=2013+%3E+G+1%2E6+MPI&ec=&firstnodedesc=Body+%28Interior+and+Exterior%29&sitinfolist=91%5E9161%5E91610063%5Enone%5E801%5E6%5EENG%5EKM%5EJD12%5E2013%5Ebd%5E4%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">(Refer to Body - "Rear Transverse Trim")</a>

Disconnect the connector, then remove the trunk/tailgate antenna (A) with loosening 2 nuts.

Disconnect the negative (-) battery terminal.

Remove the rear bumper beam assembly.

<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=bd&mmcid=4&group=SHOP&pdftype=&cat1=2013+%3E+G+1%2E6+MPI&ec=&firstnodedesc=Body+%28Interior+and+Exterior%29&sitinfolist=91%5E9184%5E91840020%5Enone%5E801%5E6%5EENG%5EKM%5EJD12%5E2013%5Ebd%5E4%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">(Refer to Body - "Rear Bumper Beam Assembly")</a>

Disconnect the connector (A) from the antenna.

Remove the rear bumper antenna (A) with loosening the mounting screws.

Disconnect the negative (-) battery terminal.

Remove the front left head lamp.

(Refer to Lighting System - "Head Lamps")

Remove the buzzer (A) after disconnecting the connector.

Disconnect the negative (-) battery terminal.

Loosen the mounting bolt after removing the holl pulg (B).

Remove the front door outside hand cover (A).

Remove the front door outside handle (A) by sliding it rearward.

Disconnect the front door outside handle connector (A).

Disconnect the negative (-) battery terminal.

Remove the guide panel (A) after loosening the screws.

Disconnect the tailgate open switch connector (A) after loosening the screws.