3.
Check that the motor operates normally. Replace the motor if it operates abnormally.
No. | Description |
1 | Battery (+) |
2 | Parking |
3 | Wiper motor input (+) |
4 | Ground |
Remove the 4P connector from the rear wiper motor.
Connect battery positive (+) and negative (-) cables to terminals 3 and 4 respectively.
Check that the motor operates normally. Replace the motor if it operates abnormally.
No. | Description |
1 | Battery (+) |
2 | Parking |
3 | Wiper motor input (+) |
4 | Ground |
Operate the motor at low speed using the stalk control.
Stop the motor operation anywhere except at the off position by disconnecting terminal 3.
Connect terminals 2 and 3.
Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 4.
Check that the motor stops running at the off position.
