4.
Remove the panoramaroof motor (B) after loosening 3 bolts.
Disconnect the negative (-) battery terminal.
Remove the roof trim assembly.
<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=bd&mmcid=4&group=SHOP&pdftype=&cat1=2013+%3E+G+1%2E6+MPI&ec=&firstnodedesc=Body+%28Interior+and+Exterior%29&sitinfolist=91%5E9157%5E91570040%5Enone%5E801%5E6%5EENG%5EKM%5EJD12%5E2013%5Ebd%5E4%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">(Refer to Body - "Roof Trim Assembly")</a>
Disconnect the connector (A).
Remove the panoramaroof motor (B) after loosening 3 bolts.
Ground the terminals as below table, and check that the roller blind motor operates.
When inspecting the panoramaroof motor operation, panoramaroof motor and roller blind motor always should be connected.
