3.
Remove the lower crash pad switch assembly (A) after loosening screws.
Disconnect the negative (-) battery terminal.
Remove the crash pad lower panel.
<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=bd&mmcid=4&group=SHOP&pdftype=&cat1=2013+%3E+G+1%2E6+MPI&ec=&firstnodedesc=Body+%28Interior+and+Exterior%29&sitinfolist=91%5E9154%5E91540040%5Enone%5E801%5E6%5EENG%5EKM%5EJD12%5E2013%5Ebd%5E4%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">(Refer to Body - "Crash Pad Lower Panel")</a>
Remove the lower crash pad switch assembly (A) after loosening screws.
Remove the lower crash pad switch assembly.
Connect the battery voltage to terminals 3 and the ground to terminal 4.
Measure the voltage between terminals 4 and 2 at each position.
Position No. | Rotation | Voltage (V) (±5%) |
0 | 0° | 10.85 |
1 | 15° | 9.78 |
2 | 30° | 9.17 |
3 | 45° | 8.55 |
4 | 60° | 7.94 |
5 | 75° | 7.32 |
6 | 90° | 6.71 |
If the voltage is not as specified, replace the head lamp leveling switch.
