2.
Turn the crankshaft pulley, and align its groove with timing mark "T" of the timing chain cover. (No.1 cylinder compression TDC position)
Remove the high pressure pump.
<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=en&mmcid=349&group=SHOP&pdftype=&cat1=2013+%3E+D+1%2E4+TCI%2DU2&firstnodedesc=Fuel+System&sitinfolist=14%5E1490%5E14902200%5Enone%5E801%5E1%5EENG%5EKM%5EJD12%5E2013%5Een%5E349%5Enone%5Enone%5Enone%5ESHOP%5E%2414%5E1490%5E14902200%5Enone%5E801%5E8%5EENG%5EKM%5EJD12%5E2013%5Een%5E349%5Enone%5Enone%5Enone%5ESHOP%5E%2414%5E1490%5E14902200%5Enone%5E801%5E6%5EENG%5EKM%5EJD12%5E2013%5Een%5E349%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">(U-II 1.4L : Refer to Fuel System – “High Pressure Pump”)</a>
<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=en&mmcid=348&group=SHOP&pdftype=&cat1=2013+%3E+D+1%2E6+TCI%2DU2&firstnodedesc=Fuel+System&sitinfolist=14%5E1490%5E14902200%5Enone%5E801%5E1%5EENG%5EKM%5EJD12%5E2013%5Een%5E348%5Enone%5Enone%5Enone%5ESHOP%5E%2414%5E1490%5E14902200%5Enone%5E801%5E8%5EENG%5EKM%5EJD12%5E2013%5Een%5E348%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">(U-II 1.6L : Refer to Fuel System – “High Pressure Pump”)</a>
Turn the crankshaft pulley, and align its groove with timing mark "T" of the timing chain cover. (No.1 cylinder compression TDC position)
Remove the timing chain cover.
(Refer to Timing System – “Timing Chain Cover”)
Remove the oil level gauge guide.
(Refer to Lubrication system – “Oil Level Gauge & Pipe”)
Remove the timing chain "C" auto tensioner (A).
Before removing auto-tensioner, install a set pin (B) (2.5 mm steel wire) after compressing the tensioner.
Remove the timing chain "C" lever (A) and the timing chain guide "1" (B).
Remove the timing chain guide "2" (A).
Remove the timing chain "C" (A).
Remove the timing chain "A" auto tensioner (A).
Before removing auto-tensioner, install a set pin (B) (2.5 mm steel wire) after compressing the tensioner.
Remove timing chain "A" lever (A) and the timing chain guide "1" (B).
Remove the timing chain "A" (A)with high pressure pump sprocket (B) and crankshaft sprocket (C).
Remove the water pump.
(Refer to Cooling System – “Water Pump”)
Take off the hook of the engine support fixture from the front engine hanger.
Set the jack to the bed plate.
Take off the hook of the engine support fixture from the front engine hanger.
Remove the timing chain case (A).
