1.
Install the cylinder head cover (A) with new head cover gasket.
Tighten the cylinder head cover bolts in the sequence shown.
Tightening torque
1st : 3.9 ~ 5.9N.m (0.4 ~ 0.6kgf.m, 2.9 ~ 4.3lb-ft)
2st : 8.8 ~ 10.8N.m (0.9 ~ 1.1kgf.m, 6.5 ~ 8.0lb-ft)
note
●
Standard liquid gasket : LOCTITE 5900, LOCTITE 5900H, THREE BOND 1217H
●
Check that the mating surfaces are clean and dry before applying liquid gasket.
●
Apply liquid gasket in a 7mm (0.28in) wide bead without stopping.
●
Assemble the cylinder head cover in 5 minutes after applying the liquid gasket.
●
After assembly, wait at least 30 minutes before filling the engine with oil.
●
Apply liquid gasket to T-joint before assembling cylinder head cover.
