2.
Remove the radiator upper hose (A) and lower hose (B).
note
Install the radiator hoses as shown illustrations.
Remove the cooling fan.
(Refer to Cooling System - "Cooling Fan")
Remove the radiator upper hose (A) and lower hose (B).
Install the radiator hoses as shown illustrations.
Disconnect the ATF cooler hoses.
<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=tr&mmcid=252&group=SHOP&pdftype=&cat1=2013+%3E+D+1%2E6+TCI%2DU2&firstnodedesc=Automatic+Transaxle+System&sitinfolist=52%5E5205%5E52050100%5Enone%5E801%5E1%5EENG%5EKM%5EJD12%5E2013%5Etr%5E252%5Enone%5Enone%5Enone%5ESHOP%5E%2452%5E5205%5E52050100%5Enone%5E801%5E8%5EENG%5EKM%5EJD12%5E2013%5Etr%5E252%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">(Refer to Automatic Transaxle System - "Automatic transaxle")</a>
Remove the front bumper cover.
<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=bd&mmcid=4&group=SHOP&pdftype=&cat1=2013+%3E+G+1%2E6+MPI&firstnodedesc=Body+%28Interior+and+Exterior%29&sitinfolist=91%5E9181%5E91810010%5Enone%5E801%5E6%5EENG%5EKM%5EJD12%5E2013%5Ebd%5E4%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">(Refer to Body - "Front Bumper Cover")</a>
Remove the head lamps.
<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=imm&mmcid=1&group=SHOP&pdftype=&cat1=2013+%3E+G+1%2E6+MPI&firstnodedesc=Body+Electrical+System&sitinfolist=92%5E9249%5E92490100%5Enone%5E801%5E4%5EENG%5EKM%5EJD12%5E2013%5Eimm%5E1%5Enone%5Enone%5Enone%5ESHOP%5E%2492%5E9249%5E92490100%5Enone%5E801%5E1%5EENG%5EKM%5EJD12%5E2013%5Eimm%5E1%5Enone%5Enone%5Enone%5ESHOP%5E%2492%5E9249%5E92490100%5Enone%5E801%5E8%5EENG%5EKM%5EJD12%5E2013%5Eimm%5E1%5Enone%5Enone%5Enone%5ESHOP%5E%2492%5E9249%5E92490100%5Enone%5E801%5E5%5EENG%5EKM%5EJD12%5E2013%5Eimm%5E1%5Enone%5Enone%5Enone%5ESHOP%5E%2492%5E9249%5E92490100%5Enone%5E801%5E6%5EENG%5EKM%5EJD12%5E2013%5Eimm%5E1%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">(Refer to Body Electrical System - "Head Lamps")</a>
Remove the air guard (A).
Tightening torque :
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 Ib-ft)
Remove the radiator upper bracket (A).
Remove the A/C pipe mounting bracket bolt (A).
Separate the A/C condenser from the radiator and then lift up the radiator assembly (A).
Installation is reverse order of removal.
Fill with engine coolant.
(Refer to Cooling System - "Coolant").
Start engine and check for leaks.
Recheck engine coolant level.
