P2032 is set when rear exhaust temp. sensor(T5-CPF) signal is below 0.2V - the lower limiting value - for more than 0.6 sec.
Item | Detecting Condition | Possible Cause | ||
DTC Strategy |
•
Voltage monitoring |
•
Exhaust temp. sensor(T5-CPF) wiring
•
Exhaust temp. sensor(T5-CPF) component | ||
Enable Conditions |
•
IG KEY "ON" | |||
Threshold Value |
•
Rear exhaust temp. sensor(T5-CPF) signal voltage below 0.2V | |||
Diagnostic Time |
•
0.6 sec. | |||
Fail Safe | Fuel Cut | NO |
•
Exhaust temp. is considered as 300℃
•
Engine check lamp blinks. | |
EGR Off | NO | |||
Fuel Limit | NO | |||
Check Lamp | BLINK | |||
