Component Inspection
■ Check MAPS performance
1.

IG "OFF".

2.

Connect CH A probe to signal terminal MAPS and CH B probe to signal terminal of TPS connector.

3.

Warm up the engine to normal operating temperature.

4.

Measure signal waveform of MAPS and TPS together by stepping on and off the accelerator pedal.

Specification : Refer to Signal Waveform & Data

■ Confirm Part Inspection
5.

Does the MAPS operate properly? (Check variation)

▶ Repair as necessary and go to "Verification of vehicle Repair" procedure.

▶ Go to "Component Inspection" procedure.

Яндекс.Метрика