If The deviation between the value by LPC and the value by internal counting is over 20 sec or ECM detects an error on internal memory, ECM sets P2610.
Item | Detecting Condition | Possible cause | |
DTC Strategy |
•
Soak time counter error | 1. Poor connection 2. Open or short to ground in power circuit 3. Open or Short to ground in signal circuit 4. MAPS 5. PCM | |
Enable Conditions | Case1 |
•
Engine "ON" is higher than 10 sec.
•
Battery voltage is higher than 8V | |
Case2 |
•
The internal memory is noraml. | ||
Threshold value | Case1 |
•
The deviation between the value by LPC and the value by internal counting is higher than 10 sec | |
Case2 |
•
LPC is reset to "0" abnormally. | ||
Diagnosis Time |
•
- | ||
MIL On Condition |
•
2 Driving Cycles | ||
* LPC(Low Power Counter) : Time counter after IG OFF
