If intake manifold pressure is lower than the minimum threshold value or higher than the maximum threshold value according to RPM and TPS under normal TPS signal input condition, ECM sets DTC P0106.
Item | Detecting Condition | Possible Cause | |
DTC Strategy |
•
Rationality check | 1. Poor connection 2. MAPS | |
Enable Conditions |
•
Elapsed time after start is higher than 1 sec
•
No TPS error detected
•
No CVVT error detected
•
No signal error detected | ||
Threshold Value | Case1 |
•
Intake manifold pressure > max. Threshold f(Eng. Speed,TPS) | |
Case2 |
•
Intake manifold pressure < min. Threshold f(Eng. Speed, TPS) | ||
Case3 |
•
Measured intake manifold pressure stuck | ||
Diagnostic Time |
•
5 sec | ||
MIL ON Condition |
•
2 driving cycle | ||
