If sensor signal input is higher than 4.7V during 0.5 sec, ECM sets DTC P0193.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Signal check, high | 1. Poor connection 2. Open or short to power in signal circuit 3. Short to ground in signal circuit 4. FPS |
Enable Conditions |
•
IG ON | |
Threshold Value |
•
Sensor voltage is higher than 4.7V | |
Diagnostic Time |
•
0.5 sec. | |
MIL ON Condition |
•
2 driving cycle |
