AFLS ECU set this code If input value(gear position signal) is message signal timeout or invalid value.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Signal monitoring | 1. CAN communication circuit Open/Short 2. Faulty TCU 3. Faulty CLU |
Enable Conditions |
•
IG ON | |
Threshold Value |
•
Gear position signal is invalid value CAN communication signal not output from TCU/CLU(MT) | |
Detecting time |
•
0.5 sec. | |
Fail Safe |
•
Leveling : normal operation Swivelling : stop at present status | |
Check Lamp |
•
No |
