1.
After loosening the mounting screws, then remove the tail gate trim (A).
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.
After loosening the mounting screws, then remove the tail gate trim (A).
Install in the reverse order of removal.
Replace any damaged clips.
Using a screwdriver or remover, remove the tail gate upper trim (A).
Install in the reverse order of removal.
Replace any damaged clips.
Remove the tail gate trim.
Remove the tail gate upper trim.
After loosening the mounting screws, then remove the tail gate side trim (A).
Install in the reverse order of removal.
Replace any damaged clips.
