1.
Using a screwdriver or remover, remove the front door grip handle cover (A).
Put on gloves to protect your hands.
Be careful not to scratch the door trim and other parts.
Using a screwdriver or remover, remove the front door grip handle cover (A).
Using a screwdriver or remover, remove the front door inside handle housing (A) and front door pull handle cap (B).
After loosening the mounting screws, then remove the front door trim (A).
Disconnect the front door inside handle cable (A).
Disconnect the IMS switch connector (A) and power window switch connector (B).
Install in the reverse order of removal.
Make sure the connector is connected properly.
Make sure the door locks/unlocks and opens/closes properly.
Replace any damaged clips.
