2.
Remove the front door outside handle base (A) by pushing in the lock pins located in the back.
Remove the front door module.
(Refer to Front Door - "Front Door Module")
Remove the front door outside handle base (A) by pushing in the lock pins located in the back.
Disconnect the front door outside handle cable (A).
Disconnect the front door latch connector (B).
Remove the front door latch assembly (A) by pulling it.
Remove the front door inside handle cable (A) by pulling it.
Install in the reverse order of removal.
Make sure the connector is connected properly.
Make sure the door locks/unlocks and opens/closes properly.
Replace any damaged clips.
