1.
Using a screwdriver or remover, remove the rear door delta inner cover (A).
Put on gloves to protect your hands.
Be careful not to scratch the door trim and other parts.
Using a screwdriver or remover, remove the rear door delta inner cover (A).
Using a screwdriver or remover, remove the rear door inside handle housing (A) and rear door pull handle cap (B).
After loosening the mounting screws, then remove the rear door trim (A).
Disconnect the rear door inside handle cable (A).
Disconnect the power window switch connector (A).
Install in the reverse order of removal.
Make sure the connector is connected properly.
Make sure the door locks/unlocks and opens/closes properly.
Replace any damaged clips.
