2.
Remove the rear door outside handle base (A) by pushing in the lock pins located in the back.
Remove the rear door module.
(Refer to Rear Door - "Rear Door Module")
Remove the rear door outside handle base (A) by pushing in the lock pins located in the back.
Disconnect the rear door outside handle cable (A).
Disconnect the rear door latch connector (B).
Remove the rear door latch assembly (A) by pulling it.
Remove the rear door inside handle cable (A) by pulling it.
Install in the reverse order of removal.
Make sure the connector is connected properly.
Make sure the door locks/unlocks and opens/closes properly.
Replace any damaged clips.
