1.
Using a screwdriver or remover, remove the crash pad side cover [LH] (A).
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.
Take care not to scratch the body surface.
Using a screwdriver or remover, remove the crash pad side cover [LH] (A).
After loosening the mounting screws, then remove the crash pad lower panel (A).
Disconnect the diagnosis connector (A) and crash pad lower switch connector (B).
Install in the reverse order of removal.
Make sure the connector are connected in properly.
Replace any damaged clips.
