4.
Disconnect the luggage lamp connector (B).
Put on gloves to protect your hands.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
Remove the rear wheel house trim.
(Refer to Interior Trim - "Rear Wheel House Trim")
Remove the rear transverse trim.
(Refer to Interior Trim - "Rear Transverse Trim")
Using a screwdriver or remover, remove the luggage lamp (A).
Disconnect the luggage lamp connector (B).
After loosening the mounting bolts, screw, clips, then remove the luggage side trim (A).
Install in the reverse order of removal.
Replace any damaged clips.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
Put on gloves to protect your hands.
Remove the rear wheel house trim.
(Refer to Interior Trim - "Rear Wheel House Trim")
Remove the rear transverse trim.
(Refer to Interior Trim - "Rear Transverse Trim")
After loosening the mounting bolt, screw, clips, then remove the luggage side trim (A).
Disconnect the luggage lamp connector (A).
Install in the reverse order of removal.
Replace any damaged clips.
Make sure the connector is plugged in properly.
