1.
Using a screwdriver or remover, remove the front seat shield outer cover (A).
Put on gloves to protect your hands.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
Using a screwdriver or remover, remove the front seat shield outer cover (A).
Disconnect the power seat switch connector (A).
Install in the reverse order of removal.
Replace any damaged clips.
Make sure the connector is plugged in properly.
Put on gloves to protect your hands.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
Remove the height adjust lever cap (A).
After loosening the mounting screw, then remove the height adjust lever (B).
Remove the handwheel recliner (A).
After loosening the mounting screw, then remove the front seat shield outer cover (A).
Disconnect the lumbar support switch connector (A).
Install in the reverse order of removal.
Replace any damaged clips.
Make sure the connector is plugged in properly.
