2.
After loosening the mounting bolt, then remove the front seat belt upper anchor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)
When installing the belt, make sure not to damage the pretensioner.
Remove the center pillar upper trim.
(Refer to Interior Trim - "Center Pillar Trim")
After loosening the mounting bolt, then remove the front seat belt upper anchor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)
After disconnecting the pretensioner connector lock pin, remove the front seat belt pretensioner connector (B), loosen the mounting bolts, then remove the front seat belt pretensioner (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)
Install in the reverse order of removal.
Replace any damaged clips.
Make sure the connector is plugged in properly.
When installing the belt, make sure not to damage the pretensioner.
Remove the rear inner outer trim.
(Refer to Interior Trim - "Center Pillar Trim")
After loosening the mounting bolt, then remove the front seat belt lower anchor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)
Remove the front seat belt upper anchor cover (A).
After loosening the mounting bolt, then remove the front seat belt upper anchor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)
After disconnecting the pretensioner connector lock pin, remove the front seat belt pretensioner connector (B), loosen the mounting bolts, then remove the front seat belt pretensioner (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)
Install in the reverse order of removal.
Replace any damaged clips.
Make sure the connector is plugged in properly.
