2.
Disconnect the differential pressure sensor connector (A) and the Lambda sensor connector (B).
Turn ignition switch OFF and disconnect the negative (-) battery cable.
Disconnect the differential pressure sensor connector (A) and the Lambda sensor connector (B).
Romove the cowl cover for securing the working space.
<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=bd&mmcid=4&group=SHOP&pdftype=&cat1=2013+%3E+D+1%2E6+TCI%2DU2&ec=&firstnodedesc=Body+%28Interior+and+Exterior%29&sitinfolist=91%5E9147%5E91470010%5Enone%5E801%5E6%5EENG%5EKM%5EJD12%5E2013%5Ebd%5E4%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">(Refer to Body - "Cowl Top Cover")</a>
Disconnect the exhaust gas temperature sensor #1 connector (A) and the #2 connector (B).
Remove the heat protector (C) after removing 3 bolts.
Disconnect the hoses (A) connected with the differential pressure sensor from the CPF assembly.
Remove the DPF assembly (D) after removing the mounting bolts (A) and nut (B) from the turbo charger (C).
DPF assembly mounting bolt/nut:
39.2 ~ 49.1 Nm (4.0 ~ 5.0 kgf.m, 28.9 ~ 36.2 lb-ft)
Lift the vehicle.
Remove the front muffler assembly.
<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=en&mmcid=348&group=SHOP&pdftype=&cat1=2013+%3E+D+1%2E6+TCI%2DU2&ec=&firstnodedesc=Engine+Mechanical+System&sitinfolist=12%5E1235%5E12350600%5Enone%5E801%5E1%5EENG%5EKM%5EJD12%5E2013%5Een%5E348%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">(Refer to Engine Mechanical System - "Muffler")</a>
Remove the DPF protector (A) after removing the mounting bolts.
Remove the turbo charger line (B) after removing the mounting bolt (A).
Remove the DPF assembly stay after removing the installation bolts (A).
DPF assembly stay mounting bolt:
49.5 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft)
[LH]
[RH]
Remove the DPF assembly by lifting it up. [LHD]
Remove the DPF assembly by taking it down. [RHD]
