1.
Disconnect the neutral position switch connector (A).
Disconnect the neutral position switch connector (A).
Check the continuity between no. 1 and 2 terminals of neutral position switch.
When the shift lever is in neutral, there should be contunuity.
If necessary, repair or replace the neutral position switch.
Remove the air cleaner assembly.
<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=en&mmcid=348&group=SHOP&pdftype=&cat1=2013+%3E+D+1%2E6+TCI%2DU2&ec=&firstnodedesc=Engine+Mechanical+System&sitinfolist=12%5E1235%5E12350100%5Enone%5E801%5E1%5EENG%5EKM%5EJD12%5E2013%5Een%5E348%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">(Refer to Engine Mechanical System - "Air Cleaner")</a>
Disconnect the neutral position switch connector (A).
Remove the neutral position switch.
Replace a new one and install the neutral position switch, then connect the connector.
Tightening torque:
39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)
