Inspection
1.

Check the select cable for proper operation and for damage.

2.

Check the shift cable for proper operation and for damage.

3.

Check the boots for damage.

4.

Check the boots for wear abrasion sticking, restricted movement or damage.

Removal
1.

Remove the floor console assembly.

<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=bd&mmcid=4&group=SHOP&pdftype=&cat1=2013+%3E+G+1%2E6+MPI&ec=&firstnodedesc=Body+%28Interior+and+Exterior%29&sitinfolist=91%5E9151%5E91510010%5Enone%5E801%5E6%5EENG%5EKM%5EJD12%5E2013%5Ebd%5E4%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">(Refer to Body - " Floor Console")</a>

2.

Remove the air duct (A).

3.

Remove the select cable snap pin (A) and then remove the select cable (B) from the shift lever pin.

4.

Remove the shift cable (B) after removing the clip (A).

5.

Remove the cable guide (A) from lever assembly after pulling in the direction of the arrow.

6.

Remove the crash pad and cowl cross bar.

<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=bd&mmcid=4&group=SHOP&pdftype=&cat1=2013+%3E+G+1%2E6+MPI&ec=&firstnodedesc=Body+%28Interior+and+Exterior%29&sitinfolist=91%5E9154%5E91540160%5Enone%5E801%5E6%5EENG%5EKM%5EJD12%5E2013%5Ebd%5E4%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">(Refer to Body - "Cowl Cross Bar Assembly")</a>

7.

Remove the heater unit.

<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=ac&mmcid=5&group=SHOP&pdftype=&cat1=2013+%3E+G+1%2E6+MPI&ec=&firstnodedesc=Heating%2CVentilation%2C+Air+Conditioning&sitinfolist=71%5E7130%5E71300100%5Enone%5E801%5E6%5EENG%5EKM%5EJD12%5E2013%5Eac%5E5%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">(Refer to Heating,Ventilation, Air Conditioning - "Heater Unit")</a>

8.

Remove the retainer (A) after loosen the nut (B).

9.

Remove the following items.

A.

Engine cover

<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=en&mmcid=109&group=SHOP&pdftype=&cat1=2013+%3E+G+1%2E6+MPI&ec=&firstnodedesc=Engine+Mechanical+System&sitinfolist=12%5E1215%5E12150110%5Enone%5E801%5E1%5EENG%5EKM%5EJD12%5E2013%5Een%5E109%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">(Refer to Engine Mechanical System - "Engine Cover")</a>

B.

Air cleaner assembly

<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=en&mmcid=109&group=SHOP&pdftype=&cat1=2013+%3E+G+1%2E6+MPI&ec=&firstnodedesc=Engine+Mechanical+System&sitinfolist=12%5E1235%5E12350100%5Enone%5E801%5E1%5EENG%5EKM%5EJD12%5E2013%5Een%5E109%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">(Refer to Engine Mechanical System - "Air Cleaner")</a>

C.

Battery and battery tray

<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=en&mmcid=109&group=SHOP&pdftype=&cat1=2013+%3E+G+1%2E6+MPI&ec=&firstnodedesc=Engine+Electrical+System&sitinfolist=11%5E1125%5E11250200%5Enone%5E801%5E1%5EENG%5EKM%5EJD12%5E2013%5Een%5E341%5Enone%5Enone%5Enone%5ESHOP%5E%2411%5E1125%5E11250200%5Enone%5E801%5E8%5EENG%5EKM%5EJD12%5E2013%5Een%5E341%5Enone%5Enone%5Enone%5ESHOP%5E%2411%5E1125%5E11250200%5Enone%5E801%5E4%5EENG%5EKM%5EJD12%5E2013%5Een%5E341%5Enone%5Enone%5Enone%5ESHOP%5E%2411%5E1125%5E11250200%5Enone%5E801%5E3%5EENG%5EKM%5EJD12%5E2013%5Een%5E341%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">(Refer to Engine Electrical System - "Battery")</a>

10.

Remove the shift & select cable.

(1)

Remove the pin (A) and washer (B).

(2)

Make unlock clip (C) and then remove the shift & select cable and the clip (C) from the bracket.

note
●

Do not reuse the clip (C).

11.

Remove the shift cable at cabin room.

Installation
caution
●

When installing, set room side Shift lever and T/M side lever to 3rd position.

1.

Install the control cable (B) and clip (A) on the bracket.

2.

Install the washer (B) and pin (A).

3.

Tighten the nut (B) after install the retainer (A).

Tightening torque:

N.m (1.2 ~ 1.5 kgf.m, lb-ft)

4.

Install the crash pad and cowl cross bar.

<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=bd&mmcid=4&group=SHOP&pdftype=&cat1=2013+%3E+G+1%2E6+MPI&ec=&firstnodedesc=Body+%28Interior+and+Exterior%29&sitinfolist=91%5E9154%5E91540160%5Enone%5E801%5E6%5EENG%5EKM%5EJD12%5E2013%5Ebd%5E4%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">(Refer to Body - "Cowl Cross Bar Assembly")</a>

5.

Install the heater unit.

<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=ac&mmcid=5&group=SHOP&pdftype=&cat1=2013+%3E+G+1%2E6+MPI&ec=&firstnodedesc=Heating%2CVentilation%2C+Air+Conditioning&sitinfolist=71%5E7130%5E71300100%5Enone%5E801%5E6%5EENG%5EKM%5EJD12%5E2013%5Eac%5E5%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">(Refer to Heating,Ventilation, Air Conditioning - "Heater Unit")</a>

6.

Install the cable guide (B) on lever assembly.

7.

Install the shift cable (B) and clip (A).

8.

Shift lever to "3rd".

9.

Install the snap pin (A) after install the select cable (B).

caution
●

Install the snap pin (A) after adjust the select cable (B).

(Refer to "adjustment of control cable")

10.

Install the air duct (A).

11.

Install the floor console assembly.

<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=bd&mmcid=4&group=SHOP&pdftype=&cat1=2013+%3E+G+1%2E6+MPI&ec=&firstnodedesc=Body+%28Interior+and+Exterior%29&sitinfolist=91%5E9151%5E91510010%5Enone%5E801%5E6%5EENG%5EKM%5EJD12%5E2013%5Ebd%5E4%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">(Refer to Body - " Floor Console")</a>

12.

Install the following items.

A.

Engine cover

<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=en&mmcid=109&group=SHOP&pdftype=&cat1=2013+%3E+G+1%2E6+MPI&ec=&firstnodedesc=Engine+Mechanical+System&sitinfolist=12%5E1215%5E12150110%5Enone%5E801%5E1%5EENG%5EKM%5EJD12%5E2013%5Een%5E109%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">(Refer to Engine Mechanical System - "Engine Cover")</a>

B.

Air cleaner assembly

<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=en&mmcid=109&group=SHOP&pdftype=&cat1=2013+%3E+G+1%2E6+MPI&ec=&firstnodedesc=Engine+Mechanical+System&sitinfolist=12%5E1235%5E12350100%5Enone%5E801%5E1%5EENG%5EKM%5EJD12%5E2013%5Een%5E109%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">(Refer to Engine Mechanical System - "Air Cleaner")</a>

C.

Battery and battery tray

<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=en&mmcid=109&group=SHOP&pdftype=&cat1=2013+%3E+G+1%2E6+MPI&ec=&firstnodedesc=Engine+Electrical+System&sitinfolist=11%5E1125%5E11250200%5Enone%5E801%5E1%5EENG%5EKM%5EJD12%5E2013%5Een%5E341%5Enone%5Enone%5Enone%5ESHOP%5E%2411%5E1125%5E11250200%5Enone%5E801%5E8%5EENG%5EKM%5EJD12%5E2013%5Een%5E341%5Enone%5Enone%5Enone%5ESHOP%5E%2411%5E1125%5E11250200%5Enone%5E801%5E4%5EENG%5EKM%5EJD12%5E2013%5Een%5E341%5Enone%5Enone%5Enone%5ESHOP%5E%2411%5E1125%5E11250200%5Enone%5E801%5E3%5EENG%5EKM%5EJD12%5E2013%5Een%5E341%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">(Refer to Engine Electrical System - "Battery")</a>

Adjustment
Select cable adjustment
1.

Remove the select cable snap pin (A) and then remove the select cable (B) from the shift lever pin.

2.

Shift the shift lever to 3rd gear.

3.

Move the slide clip (B) of guide member (A) in the direction as shown in the illustration.

4.

Install the select cable (A).

5.

Insert the slide clip (A) in the direction as shown in the illustration and then install the snap pin (B).

Яндекс.Метрика