2.
Disconnect the oil cooler hose(A).
Loosen the drain plug and drain the coolant. Open the radiator cap to make rapid draining.
(Refer to Cooling System - "Coolant")
Disconnect the oil cooler hose(A).
Remove the oil filter(B) with the SST(09263-2E000 (A), the oil filter wrench).
Loosen the mounting bolt(A), and then remove the oil cooler(B).
Apply a light coat of engine oil to the oil cooler packing surface (A), and then install the oil cooler(C) with fix bolt (B).
Tightening torque :
50.0 ~ 55.8 N.m (5.1 ~ 5.7kgf.m, 36.8 ~ 41.2 lb-ft)
Install the oil filter(B) with the SST(09263-2E000 (A), the oil filter wrench).
Tightening torque :
11.7 ~ 15.6 N.m (1.2 ~ 1.6kgf.m, 8.6 ~ 11.5 lb-ft)
Install the oil cooler(A).
Fill the radiator with coolant and check for leaks.
