3.
Disconnect the over flow hose (A) from radiator.
Disconnect the battery negative (-) terminal.
Remove the air duct and RCV hose.
(Refer to Intake and Exhaust System - "Air Cleaner")
Disconnect the over flow hose (A) from radiator.
Disconnect the fan controller connectors (A).
Remove the fan controller assembly (B).
Tightening torque :
4.9 ~ 8.3 N.m (0.5 ~ 0.85 kgf.m, 3.6 ~ 6.1 lb-ft)
Disconnect the radiator upper hose (A).
Remove the filler neck assembly bolts (A).
Remove the MAPS.
(Refer to Engine Control / Fuel System - "Manifold Absolute Pressure Sensor(MAPS)")
Remove the cooling fan assembly.
Tightening torque :
4.9 ~ 7.9 N.m (0.5 ~ 0.8 kgf.m, 3.6 ~ 5.8 lb-ft)
Install in the reverse order of removal.
Remove the cooling fan from the cooling fan assembly (A).
Remove the cover (A).
Remove the fan motor (A) from the cooling fan shroud.
Assemble in the reverse order of disassembly.
Disconnect the fan motor connector from the resistor.
Connect the battery voltage to the "+" terminal and ground to "-" terminal.
Check the cooling fan motor operates well.
