2.
Disconnect the fuel filler hose (A), leveling hose (B) and the ventilation hose (C).
Lift the vehicle.
Disconnect the fuel filler hose (A), leveling hose (B) and the ventilation hose (C).
Open the fuel filler door and then remove the filler-neck mounting bolt (A).
Remove the rear-LH wheel, tire, and the inner wheel house.
Remove the filler-neck assembly from the vehicle after removing the bracket mounting bolt (A).
Install in the reverse order of removal.
Filler-neck assembly bracket mounting bolt :
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
Filler-neck assembly mounting screw :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
