2.
Remove the front wheel and tire (A) from front hub.
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
caution
●
Be careful not to damage to the hub bolts when removing the rear wheel and tire (A).
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
Remove the front wheel and tire (A) from front hub.
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
Be careful not to damage to the hub bolts when removing the rear wheel and tire (A).
Remove the lower arm (A) from the knuckle.
Tightening torque:
98.0~117.6 N.m(10.0~12.0 kgf.m, 72.3~86.7 lb-ft)
Loosen the bolts and nuts and then remove the front lower arm (A).
Tightening torque
98.1 ~ 117.7N.m(10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)
Tightening torque
156.9 ~ 176.5N.m(16.0 ~ 18.0kgf.m, 115.7 ~ 130.2lb-ft)
Install in the reverse order of removal.
Check the bushing for wear and deterioration.
Check the front stabilizer bar for deformation.
Check the all bolts and nuts.
