It search automatically sensor location and learn the new sensor.
To check defect of system or vehicle, use the sensor information, distance, indistinct noise, automatic learning status, vehicle battery condition, and inner receiver condition.
Item | Specifications |
Dark current | Max 0.5mA [ Ign off, Can bus off] |
Connector quantity | 6 pin [Can msg use warning lights] |
MCU | UPD78F1829 [NEC, 192k, 48pin] |
RF Receiver | TDA5236 [Infineon, -3dbm better, 3*3 size] |
EEPROM | MCU with built-in memory |
Function | Delete "Parking Supervision" function [Detection function of the pressure changes when stopping -deletion, dark current reduction] |
Initial state
The receiver is a single component parts, replaced parts must be initial state.
Platform information and ID sensor is not entered.
Normal operation states
To detect the tire pressure or DTC, the receiver must be in normal operating condition.
Verify the location of sensor and information through receiver.
Normal operation
Once process is finished successfully, the ID of four sensors or wheel location is entered to the memory device.
If there is pressure loss and air leakage until ending the automatic learning, detect the previous learned sensor ID.
Does not appear spare tire inflation and DTC status.
General condition for learning new sensor.
The receiver automatically finds out the location of four sensors.
The receiver should receive the sensor that is not temporary.
