Remove the front driveshaft.

(Refer to Driveshaft Assembly - “Front Driveshaft”)

Remove the TJ joint assembly.

(Refer to Driveshaft Assembly - “TJ Joint”)

Remove the remove the both side of band (B) of the dynamic damper (A).

Fix the driveshaft (A) with a vice (B) as illustrated.

Apply soap powder on the shaft to prevent being damaged between the shaft spline and the dynamic damper when the dynamic damper is removed.

Seperate the dynamic damper (A) from the shaft (B) carefully.

Apply soap powder on the shaft to prevent being damaged between the shaft spline and the dynamic damper.

Install the dynamic damper.

Install the dynamic damper band (A).

Using the SST(09495-3K000), secure the TJ boot bands (B).

Install the TJ joint assembly.

(Refer to Driveshaft Assembly - “TJ joint”)

Install the front driveshaft.

(Refer to Driveshaft Assembly - “Front Driveshaft”)