2.
Loosen the oil filler plug (A).
Stop the engine and uplift the vehicle with lift.
Loosen the oil filler plug (A).
Check the oil level.
Oil level must be up to fill the hole, if not, add oil until it runs over.
Install the filler plug.
Tightening torque:
58.9 ~ 78.5 N.m (6.0 ~ 8.0 kgf.m, 43.4 ~ 57.8 lb-ft)
Stop the engine and uplift the vehicle with lift.
Drain the manual transaxle oil after loosening the drain plug (A).
Install the drain plug with new gasket.
Tightening torque:
58.9 ~ 78.5 N.m (6.0 ~ 8.0 kgf.m, 43.4 ~ 57.9 lb-ft)
Add new oil through the filler plug hole and, fill it just below the plug opening.
Standard oil: SAE 75W/85, API GL-4
Oil capacity: 1.9 ~ 2.0 L (0.50 ~ 0.53 U.S.gal., 2.01 ~ 2.11 U.S. qt., 1.67 ~ 1.76 lmp qt.)
