3.
Remove the shower duct (A).
Press the VENT switch more then 4 times within 2 seconds while pressing the OFF switch.
Display | Fail description |
00 | Normal |
50 | Cluster ion generator fault |
* For diagnostic procedure, refer to DTC guide.
Disconnect the negative (-) battery terminal.
Remove the glove box housing.
<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=bd&mmcid=4&group=SHOP&pdftype=&cat1=2013+%3E+G+1%2E6+MPI&ec=&firstnodedesc=Body+%28Interior+and+Exterior%29&sitinfolist=91%5E9154%5E91540070%5Enone%5E801%5E6%5EENG%5EKM%5EJD12%5E2013%5Ebd%5E4%5Enone%5Enone%5Enone%5ESHOP%5E%24"target="_blank">(Refer to Body - "Glove Box Housing")</a>
Remove the shower duct (A).
Disconnect the connector and then remove the cluster ionizer (B) after loosening the mounting screws.
Install in the reverse order of removal.
