3.
Measure resistance between terminal “+” and “-” of the evaporator temperature sensor.
Turn the ignition switch OFF.
Disconnect the evaporator temperature sensor connector.
Measure resistance between terminal “+” and “-” of the evaporator temperature sensor.
Connect the evaporator temperature sensor connector.
Run the engine and turn the A/C switch ON, then measure the voltage between the terminals of the harness connector.
Evaporator core temperature [°C(℉)] | Resistance [kΩ] | Voltage [V] |
-20(-4) | 70.04 | 3.50 |
-10(14) | 43.35 | 2.96 |
0(32) | 27.62 | 2.40 |
10(50) | 18.07 | 1.88 |
20(68) | 12.11 | 1.44 |
30(86) | 8.30 | 1.08 |
40(104) | 5.81 | 0.81 |
50(122) | 4.15 | 0.61 |
Disconnect the negative (-) battery terminal.
Disconnect the evaporator temperature sensor connector (A).
Remove the evaporator temperature sensor (B) by pulling it out after rotating it 90° in a counterclockwise direction.
Install in the reverse order of removal.
