Ignition Coil
Item | Specification |
Primary Coil Resistance (Ω) | 0.79 ± 15% [20℃ (68℉)] |
Secondary Coil Resistance (kΩ) | 7.0 ± 15% [20℃ (68℉)] |
Spark plug
Item | Specification |
Type | SILZKR6D8E |
Gap | 0.7 ~ 0.8 mm (0.028 ~ 0.31 in.) |
Condenser
Item | Specification |
Capacitance (uF) | 0.47 [1KHz] |
Insulation resistance (MΩ) | 1,000 [DC 500 V/1 Min] |
Alternator
Item | Specification | |
Rated voltage | 13.5V, 110A | |
Speed in use | 1,000 ~ 18,000 rpm | |
Voltage regulator | IC Regulator built-in type | |
Regulator Setting Voltage | External mode | Refer to below graph |
Internal mode | 14.55 ± 0.3V | |
Temperature Gradient | External mode | 0 ± 3 mV / °C |
Internal mode | -3.5 ± 2mV / °C |
Battery
Item | Specification |
Model type | CMF60L-DIN |
Cold Cranking Amperage (A) | 550 (SAE) / 440 (EN) |
Reserve Capacity (Min) | 92 |
Model type description
Cold Cranking Ampere (CCA): Cold Cranking Amps is a rating used in the battery industry to define a battery's ability to start an engine in cold temperatures.
The rating is the number of amps a new, fully charged battery can deliver at -18 °C(-0.4 °F) for 30 seconds, while maintaining a voltage of at least 7.2 volts for a 12 volt battery.
The higher the CCA rating, the greater the starting power of the battery.
RESERVE CAPACITY (RC) : Reserve Capacity is a battery industry rating, defining a battery's ability to power a vehicle with an inoperative alternator or fan belt.
The rating is the number of minutes a battery at 26.7 °C(80 °F) can be discharged at 25 amps and maintain a voltage of 10.5 volts for a 12 volt battery.
The higher the reserve rating, the longer your vehicle can operate should your alternator or fan belt fail.
Starter
Item | Specification | |
Rated voltage | 12 V, 1.2 kW | |
The number of pinion teeth | 10 | |
Performance [No-load, 11 V] | Ampere | Max. 95 A |
Speed | Min. 2,500 rpm |
Item | N.m | kgf.m | lb-ft |
Ignition coil mounting bolt | 9.8 ~ 11.8 | 1.0 ~ 1.2 | 7.2 ~ 8.7 |
Spark plug installation | 14.7 ~ 24.5 | 1.5 ~ 2.5 | 10.9 ~ 18.1 |
Condenser & Hanger bracket mounting nut | 18.6 ~ 23.5 | 1.9 ~ 2.4 | 13.7 ~ 17.4 |
Alternator mounting bolt [12 mm (0.47 in.)] | 19.6 ~ 26.5 | 2.0 ~ 2.7 | 14.5 ~ 19.5 |
Alternator mounting bolt [14 mm (0.55 in.)] | 29.4 ~ 41.2 | 3.0 ~ 4.2 | 21.7 ~ 30.4 |
Battery (+) terminal tightening nut | 7.8 ~ 9.8 | 0.8 ~ 1.0 | 5.2 ~ 8.7 |
Battery (-) terminal l tightening nut | 3.9 ~ 5.9 | 0.4 ~ 0.6 | 2.9 ~ 4.3 |
Battery mounting bracket bolt | 8.8 ~ 13.7 | 0.9 ~1.4 | 6.5 ~ 10.1 |
Battery tray mounting bolt | 8.8 ~ 13.7 | 0.9 ~1.4 | 6.5 ~ 10.1 |
Battery sensor cable mounting bolt | 29.4 ~ 31.4 | 3.0 ~ 3.2 | 21.7 ~ 23.1 |
Starter mounting bolt | 49.0 ~ 63.7 | 5.0 ~ 6.5 | 36.2 ~ 47.0 |