3.
Remove the starter relay (A).
Disconnect the battery negative terminal.
Remove the fuse box cover.
Remove the starter relay (A).
Using an ohmmeter, check that there is continuity between each terminal.
Terminal | Value | Measure | ||
30 - 87 | 1MΩ or Higher | If there is continuity, replace the relay. | ||
Apply 12V to terminal 85 and ground to terminal 86.
Check for continuity between terminals 30 and 87.
Terminal | Value | Measure | ||
30 - 87 | 1Ω or less | If there is no continuity between the terminals, replace the relay. | ||
If there is no continuity, replace the starter relay.
Install the starter relay.
Install the fuse box cover.
