2.
Using a screwdriver or remover, remove the center fascia panel (A).
Take care not to scratch the center fascia panel and related parts.
Eject all the disc before removing the audio unit to prevent damaging the CD player's load mechanism.
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.
Put on gloves to protect your hands.
Disconnect the negative (-) battery terminal.
Using a screwdriver or remover, remove the center fascia panel (A).
Disconnect the start/stop button connector (A).
Loosen the mounting screws (4EA).
Remove the audio assembly (A) after disconnecting the connectors and cables (B).
If the CD does not eject, do not attempt to remove it because the audio unit may be damaged.Contact an authorized dealership for assistance.
Connect the connectors and cables.
Install the audio assembly.
Install the center fascia panel.
Connect the negative (-) battery terminal.
Make sure the audio head unit connectors are plugged in properly and the antenna cable is connected properly.
