2.
Using a screwdriver or remover, remove the center fascia panel (A).
Take care not to scratch the center fascia panel and related parts.
Ejact all the disc before removing the AVN head unit to prevent damaging the CD player's load mechanism.
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.
Put on gloves to protect your hands.
Disconnect the negative (-) battery terminal.
Using a screwdriver or remover, remove the center fascia panel (A).
Disconnect the start/stop button connector (A).
Remove the ANV head unit (A) after loosening 4 screws.
Remove the AVN head unit connectors and cables (A).
If CD does not eject, don't try to remove it.
The player may be damaged.
Therefore, contact a service shop for repairs.
Connect the AVN head unit connectors and cables.
Install the AVN head unit.
Install the center fascia panel.
Connect the negative (-) battery terminal.
Make sure the AVN Head unit connectors are plugged in properly and the antenna cable is connected properly.
