Removal
caution
●

When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

●

Take care not to scratch the body surface.

●

Put on gloves to protect your hands.

1.

Disconnect the negative (-) battery terminal.

2.

Using a screwdriver or remover, remove the crash pad garnish [LH] (A).

3.

Disconnect the power door mirror switch connector (A).

4.

Using a screwdriver or remover, remove the steering column upper shroud panel (A).

5.

Using a screwdriver or remover, remove the cluster fascia cylinder panel (A).

6.

Using a screwdriver or remover, remove the center fascia panel (A).

7.

Disconnect the start/stop button connector (A).

8.

After loosening the mounting screws, then remove the center airvent duct (A).

9.

Disconnect the hazard switch connector (A) and trip switch connector (B).

10.

After loosening the mounting screws, then remove the side airvent duct [LH] (A).

11.

After loosening the mounting screws, then remove the cluster fascia upper panel (A).

12.

Remove the cluster (A) after loosening screws and disconnecting a connector (B).

Яндекс.Метрика