3.
Disconnect the connector from the actuator.
Remove the front door trim.
(Refer to Body - "Front Door Trim")
Remove the front door module.
(Refer to Body - "Front Door Module")
Disconnect the connector from the actuator.
Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only momentarily.
Check for continuity between the terminals in each switch position according to the table.
Remove the rear door trim.
(Refer to Body - "Rear Door Trim")
Remove the rear door module.
(Refer to Body - "Rear Door Module")
Disconnect the connector from the actuator.
Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only momentarily.
Check for continuity between the terminals in each switch position according to the table.
Remove the tailgate trim.
(Refer to Body - "Tailgate Trim")
Disconnect the connector from the actuator.
Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only momentarily.
Remove the tailgate open switch bracket (A) after loosening screws.
Remove the switch and disconnect the connector from the switch.
Check for continuity between the terminals in each switch position according to the table.
