Inspection
Power Window Main Switch Inspection
1.

Disconnect the negative (-) battery terminal.

2.

Remove the front door trim.

(Refer to Body - "Front Door Trim")

3.

Disconnect the connector from the switch.

4.

Check for continuity between the terminals in each switch position according to the table. If the continuity condition is not normal, replace the switch.

[4Door All Safety(LHD)]
[4Door All Safety(RHD)]
[2Door All Safety(LHD)]
[2Door All Safety(RHD)]
[2Door Auto Down(LHD)]
[2Door Auto Down(RHD)]
Passenger/Rear Power Window Switch Inspection
1.

Disconnect the negative (-) battery terminal.

2.

Remove the front door trim.

(Refer to Body - "Front Door Trim")

Remove the rear door trim.

(Refer to Body - "Rear Door Trim")

3.

Disconnect the connector from the switch.

4.

Check for continuity between the terminals in each switch position according to the table. If the continuity condition is not normal, replace the switch.

[Safety Up/Down]
[Manual Down]
Яндекс.Метрика