Check that the switch operates properly after disconnecting the room lamp connector (A).

Disconnect the negative(-) battery terminal.

Carefully remove the lamp lens (A) from the room lamp with a flat-tip screwdriver.

Replace the bulbs (B) and remove the screws if it is necessary.

Remove the room lamp assembly (A) after disconnecting the connector (B).

Disconnect the negative (-) battery terminal.

Remove the vanity lamp (A) by pressing the clip with a small screwdriver.

Remove the vanity lamp bulb (A) assembly after disconnecting the connector.

Reconnect the connector.

Install the room lamp assembly.

Install the lens.

Reconnect the vanity lamp connector.

Install the vanity lamp.