Disconnect the negative (-) battery terminal.

Remove the lighting switch of the multifunction switch.

(Refer to Multifunction Switch)

With the front fog lamp switch, make sure that continuity exists between the terminals below.

If continuity is not as specified, replace the multifunction switch.

Disconnect the negative (-) battery terminal.

Remove the front bumper cover.

(Refer to Body - "Front Bumper Cover")

Remove the front fog lamp connector (A) and main connector (B) from the front bumper.

Remove the front fog bulb (A) after turning it counterclockwise.

Remove the front fog lamp assembly (A) after loosening 4 screws.

Install the front fog bulb and connect the connect.

Install the front fog lamp assembly.

Install the front bumper cover.