4.
Remove the DC/DC converter (B) after removing nuts.
[LHD]
[RHD]
Disconnect the battery negative terminal.
Remove the glove box housing.
<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=bd&mmcid=4&group=SHOP&pdftype=&cat1=2013+%3E+G+1%2E4+MPI&ec=&firstnodedesc=Body+%28Interior+and+Exterior%29&sitinfolist=91%5E9154%5E91540070%5Enone%5E801%5E6%5EENG%5EKM%5EJD12%5E2013%5Ebd%5E4%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">(Refer to Body - "Glove Box Housing") </a>
Disconnect the DC/DC converter conector (A).
Remove the DC/DC converter (B) after removing nuts.
[LHD]
[RHD]
Install in the reverse order of removal.
After reconnecting the battery negative cable, ISG function dose not operates until the system is stabilized, about 4 hours.
If disconnecting the negative (-) battery cable from the battery during repair work for the vehicle equipped with ISG function, Battery sensor recalibration procedure should be performed after finishing the repair work.
(Refer to Charging System - "Battery Sensor")
DC DC converter installation nut:
4.0 ~ 6.0 N.m (0.4 ~ 0.6 kgf.m, 3.0 ~ 4.4 lb-ft)
