1.
Disconnect the cruise control switch connector from the control switch.
Disconnect the cruise control switch connector from the control switch.
Measure resistance between terminals on the control switch when each function switch is ON (switch is pressed).
Function switch | Terminal | Resistance (+5%) |
CANCEL | 2 - 7 | 180Ω |
SET | 2 - 7 | 330Ω |
RESUME | 2 - 7 | 550Ω |
CRUISE | 2 - 7 | 880Ω |
S/LIMIT | 2 - 7 | 1.44kΩ |
Flex Steer | 4 - 7 | 180Ω |
If not within specification, replace switch.
